Answer of your leaving message
Ho già altre cam Amaryllo e quando ho aggiunto questa nell'applicazione mi ha dato i seguenti errori:
1. facendo play al video esce il messaggio "aggiornare il firmware"
2. aprendo le impostazioni esce il messaggio "sd card error" (non ho inserito nessuna card perchè non mi serve)
3. se cerco di aggiornare il firmware esce il messaggio "non rilevato"


2017-12-05 22:04:54****************************************
thank you so much
I solved by manually updating the firmware

by daniele caiani


Dear Daniele, thank you for the mail.

Always try the hardware reset and reinstall first.
Reset and Reinstallation ( delete the camera by the app sliding toolbar ‘Delete’ first )
B.1 RESET : https://www.youtube.com/watch?v=VNvftkbS__c
B.2 INSTALL : https://www.youtube.com/watch?v=IR_m6dlKmAo /
https://www.youtube.com/watch?v=V-j_OzXsANo

If above does not help, and the front blue light (power) is still on, then, ( if blue is not on meaning power is not through, defective )
We may try the firmware update manually :

A. Please must use this tool to format the SD card on PC
https://www.sdcard.org/downloads/formatter_4/index.html
B.
Rebuild the firmware from the external SD card :
This is a manual re-build firmware procedure for your reference
(recovery and cure rate is more than 90% )
Download file
https://www.dropbox.com/s/nkeywybjwcf12ej/iCam.rar?dl=0 [PC]
C.
- Uncompress/unzip it to root directory of a MicroSD card [PC->SD]
- Insert the card to iCam or iBabi
- Plug power cord of it. CAM will auto detect the codes in the Card
to do the update ( blue light is on )
D. Auto motor calibration/rotation (About 40~50 seconds)
- Wait till front blue led is blinking. (About 2-3 minutes)
- Unplug power cord
- Take card out.
- Plug power cord again and the blue led will keep blink ( waiting for
installation )

Installation: https://www.youtube.com/watch?v=V-j_OzXsANo / If you are successful, please erase the card for normal use.

PS – this is what you see during the process
Insert the card with unzipped files
Plug in power
Short beep ( camera detect and read the files ) in 5 seconds
After about 40 seconds
Two short beeps ( writing complete )
Blue and Green lights blinking – done ( wrote in )
Unplug the power
Remove the SD and erase it