Answer of your leaving message
Hello,
When upgrading the firmware for my , I accidentally turned it off so when turned it on, it is not working anymore. Would you please provide me the approach how to rebuild the firmware for , very appreciated!

2017-12-22 14:04:25****************************************
My machine is iCam HD and its id is iCMa0fr8i.

by Emily Tai


Dear Emily, thank you for kind waiting. If the blue light is still on (power)

Rebuilding the firmware manually ( in case the ROM is damaged somehow )

A. Please must use this tool to format the SD card on PC
https://www.sdcard.org/downloads/formatter_4/index.html
B.
Rebuild the firmware from the external SD card : 
This is a manual re-build firmware procedure for your reference
(recovery and cure rate is more than 90% )
Download file
https://www.dropbox.com/s/nkeywybjwcf12ej/iCam.rar?dl=0 [PC]
C.
- Uncompress/unzip it to root directory of a MicroSD card [PC->SD]
- Insert the card to iCam or iBabi
- Plug power cord of it. CAM will auto detect the codes in the Card
to do the update ( blue light is on )
D. Auto motor calibration/rotation (About 40~50 seconds)
- Wait till front blue led is blinking. (About 2-3 minutes)
- Unplug power cord
- Take card out.
- Plug power cord again and the blue led will keep blink ( waiting for installation )

Installation: https://www.youtube.com/watch?v=V-j_OzXsANo / If you are successful, please erase the card for normal use.

PS – this is what you see during the process
Insert the card with unzipped files
Plug in power
Short beep ( camera detect and read the files ) in 5 seconds
After about 40 seconds
Two short beeps ( writing complete )
Blue and Green lights blinking – done ( wrote in )
Unplug the power
Remove the SD and erase it

Thank you